FSI PT-3000-MIL-2 Overview
PT-3000-MIL-2
If you need to Blind Rivet the cowl of a jet aircraft, the galley in a nuclear submarine, an HMMWV body panel, the tail boom of a helicopter, or the air conditioning duct in an office building and you are in a remote location without convenient power sources, the PT-3000 will help make your blind riveting job go quicker, easier and more cost-effective than any other system.
Falling within the scope of the USAF To-1-688 specification, the PT-3000 is now being used for routine aircraft sheet metal repair in an area where 12 VDC portable equipment is permitted. Developing in excess of 1,900 lbs of pulling force, the PT-3000 is able to install virtually all straight pull blind rivets from 3/32” thru 3/16” diameter and even some all aluminium 1/4” diameters.
Specifications
Pulling Force: 1,900 lbs.
Stroke: 787”
Dimensions: 11-7/8” H x 10-3/8” L x 2-5/8” W
Power Source:
3.2 Ah, 12 VDC Nickel-Metal (NiMH) Hydride Battery
Charger Source: 120 volts, 60 Hz or 220 volts, 50 Hz
Charger Cycle Time: 1 Hour
Operating Temp. Range (ambient): 32 to 120°F
Housing Material: Impact Resistant Glass Filled Nylon
There are no reviews yet.