PT-3000-C Overview
PT-3000-C
If you need to Blind Rivet the cowl of a jet aircraft, the galley in a nuclear submarine, an HMMWV body panel, the tail boom of a helicopter, or the air conditioning duct in an office building and you are in a remote location without convenient power sources, the PT-3000 will help make your blind riveting job go quicker, easier and more cost-effective than any other system.
Falling within the scope of the USAF TO-1-688 specification, we can now use PT-3000 for routine aircraft sheet metal repair in any area where 12VDC portable equipment is permitted. Developing in excess of 1,900 lbs of pulling force, the PT-3000 is able to install virtually all straight pull blind rivets from 3/32” thru 3/16” diameter. The PT-3000 kit includes the tool and battery pack only. It does not include charger.
Specifications
Pulling Force: 1,900 lbs.
Stroke: 787”
Dimensions: 11-7/8” H x 10-3/8” L x 2-5/8” W
Power Source: 3.2 Ah, 12vdc Nickel-Metal (NiMH) Hydride Battery
Charger Source: 120 volts, 60 Hz or 220 volts, 50 Hz
Charger Cycle Time: 30 Minutes
Operating Temp. Range (ambient): 32 to 120°F
Housing Material: Impact Resistant Glass Filled Nylon
There are no reviews yet.